Products | PeCon GmbH

Product Filter

Browse through our large selection of high quality products for live cell imaging and incubation on the microscope.

Hide incompatible products by selecting properties of your system/application in the left column.
Click on a product group box or heading on the right column to show these products only.

Reset filter

Microscope

Zeiss
Leica
Evident (Olympus)
Nikon
Inverted Type
Upright Type
Fixed Stage & Object Guide
X/Y Stage & Rectangular Cutout

Controller Series

PeCon System 2000
Zeiss System S
Olympus System CellVivo

Incubation Type

Large Chamber Incubation
Stage-top Incubation

Incubation Properties

Translucent Design
Light-tight Design
Laser Safety Interlocks
Large Chamber Illuminated

Application

Electrical Heating
Liquid Cooling/Heating
CO₂ Gassing (pH control)
O₂ Reduction
Humidity (Evaporation reduction)
Perfusion
Micromanipulation
Electrophysiology
Temperature Feedback

Cell Culture Vessels

Petri Dish 35
Petri Dish 60
Petri Dish 100
POC-R2
POCmini 2
Object Slide
Lab-Tek Chambered Coverglass
Lab-Tek Chamber Slide
Ibidi Slides
Multiwell Plate 06 wells
Multiwell Plate 12 wells
Multiwell Plate 24 wells
Multiwell Plate 48 wells
Multiwell Plate 96 wells
Cell Culture Flasks
Uthermol chamber

Clear Selection

Featured Product

Heating Incubation Insert <nobr>P-Set 2000</nobr>

Heating Incubation Insert P-Set 2000

This insert is made for the stable heating of many different cell culture vessels up to 60°C. It fits on inverted microscopes with a scanning stage or a mechanical stage (cut-out 160 x 110 mm). It offers a uniform heat distribution, a high thermal conductivity and is equipped with a heated and slidable CO₂-Cover. Four exchangeable baseplates enable the use of a large number of cell culture systems. Together with a temperature and a gas controller this is a versatile stage-top incubation system. To the product

PeCon receives new ISO 9001:2015 standard certification

In November 2018 PeCon successfully passed the quality audit according to the new ISO standard, which was published as ISO 9001:2015 on September 23, 2015 and replaces the previous ISO 9001:2008. PeCon stands for high product quality and customer satisfaction. All of our products are “Made in Germany”. To the certificate

Incubator NL Ti2 BLACK 2000

This new light-tight incubator has been developed for the inverted microscope Nikon Eclipse Ti2-E. Constructed from black acrylic glass the incubator encloses the microscope, the nosepiece, the objectives and further components and enables a controlled warm air incubation. In addition to the familiar incubation application, the incubator comes with innovative features: Silicone-sealed openings for the cable feed-through, a movable lamp support sealing, a one-piece temperature sensor cable, an interior lighting and a holder for the 250 ml Humidification Bottle inside the incubator. To the product

Incubator i8 - Basic Housing

The large modular incubator (basic housing plus configurable door sets and slide-in modules) is made for a controlled warm air incubation and encloses the microscope, the nosepiece, the objectives and further components. Constructed from black acrylic glass with dimmable dual LED illumination, it is designed for the Leica DMi8 inverted microscope. To the product

Perfusion Set DUAL (open perfusion) for 35 mm Petri Dishes

The perfusion set consists of a cover with a glass insert and a perfusion ring with lateral openings and screws for the canal tubes. It enables perfusion applications with 2 inlets and 2 outlets and is compatible to a large variety of 35 mm Petri dishes.

To the product

Universal Mounting Frame K100 Set

Universal Mounting Frame with 5 baseplates for ‘35’,’60′ and ‘100’ Petri dishes, POC-Systems, Lab-Tek^TM and Ibidi Chambers. The frame fixes various cell cultivation vessels on scanning and mechanical stages (opening 160x110 mm) on inverted microscopes and can be installed easily. The baseplates together with the CO₂-Cover 100-Set give a closed environment inside a large heated microscope incubator for local gassing and humidification. To the product

MODU 2000

The MODU 2000 Basic Component and the user changeable Heated Plates for multiwell plates with 6, 12, 24, 48 or 96 wells with a plane polystyrene or glass bottom heat up specimen up to 60°C. It fits on inverted microscopes with a scanning stage or a mechanical stage (cut-out 160 x 110 mm). The multiwell plates are heated directly from below with a uniform heat distribution. Together with the Incubator PM 2000 RBT it is the base for a multiwell stage-top incubation system. To the product

Incubator OL IX73/IX83 cellVivo-3 Variant 4

The large incubator is made for a controlled warm air incubation and encloses the microscope, the nosepiece, the objectives and further components. Constructed from black acrylic glass with transparent doors it is designed for inverted microscopes by Evident. To the product

CO<sub>2</sub>-O<sub>2</sub>-Controller 2000

CO₂-O₂-Controller 2000

The CO₂-O₂-Controller 2000 is a control unit for the pressure-less supply of small incubators on microscopes with a controlled CO₂/O₂ air mixture via small gas feeding. With the use of cheap technical CO₂ and N₂ a controlled gas mixture from 0.0-20.0% CO₂ and 20.8% - 0.1% O₂ can be generated. Long lasting zirconium based oxygen sensor. A large Humidifier flask is included. To the product

Incubator i8 - BLACK LS

The large modular, laser-safe incubator is made for a controlled warm air incubation and encloses the microscope, the nosepiece, the objectives and further components. Constructed from black acrylic glass and equipped with laser safety interlocks and dimmable dual LED illumination, it is designed for the Leica DMi8 inverted microscope. The incubator can be arranged individually for different microscopic applications and accessories with various slide-in modules. To the product

Cooling/Heating Humidity System

The Cooling/Heating Humidity System can control the humidity of the air inside the incubation chamber up to 95% rH without having trouble due to condensation inside the connection tube between the humidifying unit and the incubation room. Our innovative very flexible controllerless heatable tube allows this major technical improvement. The system consists of a humidification chamber with a temperature-controlled base plate, a screwed-on water tank and a heatable tube. A vibration damper is part of the system as an accessory. To the product

Humidity System 2000

The Humidity System 2000 can control the humidity of the air inside the incubation chamber up to 95% rH without having trouble due to condensation inside the connection tube between the humidifying unit and the incubation room. Our innovative very flexible controllerless heatable tube allows this major technical improvement. The system consists of a humidification chamber with a heated base plate, a screwed-on water tank and a heatable tube. A vibration damper is part of the system as an accessory. To the product

Incubator OL IX73/IX83 cellVivo-3 Variant 3

Incubator OL IX73/IX83 cellVivo-3 Variant 1

The large laser-safe incubator is made for a controlled warm air incubation and encloses the microscope, the nosepiece, the objectives and further components. Constructed from black acrylic glass it is designed to meet all laser safety requirements and is designed for inverted microscopes by Evident. To the product

Heating Incubation System XS 2000

This small incubaton system is made for the stable heating of many different cell culture vessels up to 60°C. It consists of a stage-top incubator and a heated plate. Three exchangeable Heated Plates are currently available, depending on the cell culture vessel used. The system is specially designed for the use in Piezo stages: It fits into a cut-out of 128 x 86 mm (multiwell plate) and weighs approx. 270 g. To the product

Incubator PM 2000 RBT

The small incubator is designed for warm air incubation and gassing in combination with a Heating Insert and is suitable for high-resolution microscopy. The heated glass of the incubator has a translucence of about 90% for light in the visual wavelength range, warming up the incubation chamber from the top. The abbreviation RBT stands for Rapid Balanced Temperature. Incubator PM 2000 RBT replaces Incubator PM 2000 and Incubator PM S1. To the product

Incubator OL IX73/IX83 cellVivo-3 Variant 2

Incubator XLmulti S2 DARK

The light-tight incubator for the Axio Observer comes with innovative features: A spacious access over the entire front, a movable observation window, a more comfortable handling of the lamp support despite mounted incubator, an easy assembly and disassembly due to cable entries in and below the stage, a flexible adaptation to different microscope configurations as well as a convenient interiour equipment like a humidifier bottle holder and shelves. An additional feature is the illumination of the interior which is availabe in the variants Standard (on/off) and Premium (dimmable). To the product

Adapter Frame for Universal Mounting Frame KM

Our popular products Universal Mounting Frame KM (and Click-In System) and CO₂-Cover KM are, unfortunately, not compatible to the Stage attachment Z PIEZO WSB 500 from Zeiss. In that case use this “Adapter Frame for Universal Mounting Frame KM” on top of the Universal Mounting Frame KM together with the CO₂-Cover PM / PM S for local CO₂ gassing and humidification. To the product

Control Sensor T 2000 sterilizable

The Control Sensor T 2000 sterilizable is a small-sized control device for local temperature measurements in “60” Petri dishes. By means of this sensor, the actual temperature in the medium of the cell cultivation vessel can be measured in pre-experiments. The whole sensor unit (glass cover, cable with LEMO® plug, Pt100-sensor) can be sterilized. To the product

Click-In System

The Click-In System is a multifunctional and flexible System of various insert plates for the fixation of different cell culture vessels on xy-stages and scanning stages at inverse microscopes. The Universal Mounting Frame KM or the Insert AM serve as base frames. To the product

Incubator DM 6000 CS BLACK

The large light-tight incubator is made for a controlled warm air incubation and encloses the microscope, the nosepiece, the objectives and further components. Constructed from black acrylic glass and equipped with a LED internal illumination, it is designed for the upright microscope Leica DM 6000 CS with SP8. The spacious openings allow an easy access to the interior of the incubator. To the product

PeCon Series 2000 Firmware

Get the latest firmware for our Series 2000 devices and components to have new features, bugfixes and full compatibility of all devices with each other.
To the downloads

Control Sensor Tmulti 2000

Small-sized control device for local temperature measurements of media in multiwell plates, chamber slides, chambered cover slides and Petri dishes. The medium temperature can be measured during incubation in cell culture vessels with cells or in reference vessels. The entire sensor can be autoclaved. To the product

CO₂-Controller 2000

The CO₂-Controller 2000 is a control unit used for the pressure-less supply of small incubators on microscopes with a controlled CO₂ air mixture via small gas feeding. With the use of cheap technical CO₂ a controlled gas mixture from 0.0-20.0% CO₂ can be generated. A Humidifier flask is included. To the product